What Are the Differences Between Anxiety and an Adrenaline...

Almost everyone will experience anxiety at some point in their lifetime. It's actually easiest to explain what anxiety is by comparing it to fear. These are both mood states, but with fear, there is a very real threat to the safety and well being of someone. With anxiety, the threat is only "perceived"; usually it is not real.

Key Differences Between Softball and Baseball

Many would compare softball and baseball as extremely similar sports. While that is true, there are a few key differences. First, the actual balls are different sizes; A softball is much bigger than a baseball.

Difference between Economic and Non-Economic Damages

The primary purpose of filing a personal injury claim is to pursue and recover financial compensation from an at-fault party for a victim's damages. This is intended to put the victim back into the position they were in before the accident, or to make them whole once again. But we all know this is not always possible. Sometimes, damages are more than just financial and a victim can never be the same after a serious accident. This is why several types of damages exist in accident law, and are awarded in successful personal injury cases.

Difference between Consultant MEP Models and Contractor MEP Models

The life blood of any construction or engineering project, MEP (M & E) building services are essential components of comfort for those who will certainly occupy the constructed spaces. Flawless MEP services require detailed and efficient MEP design for design decision-making, accurate documentation, performance and cost-estimation, construction planning, management and operation of the construction project. MEP models, and how they are used, are key to comprehensively creating MEP design. MEP modeling immersed consultant MEP models and contractor MEP models. It is important to understand the differences between MEP consultants and MEP contractors and then understand the models that serve them both.

5 Differences Between Indoor and Outdoor Volleyball

There are only two general types of volleyball - indoor volleyball and outdoor or beach volleyball. The two different not just in terms of location. They may share a few similarities like the use of rally point system in scoring and the required 2-point edge to declare a win, but the differences are far more than the similarities.

Difference Between Academic Writing and Business Writing

Difference Between Academic Writing and Business Writing. Firstly, let's concisely see what each term means and its probable scope.

Difference between Linux and Windows Dedicated Servers

A few years back, there was a fundamental difference between Windows Dedicated Server Hosting and Linux. However, nowdays the companies that use different hosting enjoys compatible services that reduce the difference to some extent.

Difference between Beauty Therapy & Cosmetology

People often get these two terms confused. They both take place in a beauty school, they both require some form of certification, and they both involve a cosmetic work that can help clients look and feel more beautiful than ever before. Most individuals think that these two are the same thing, but there are huge differences that individuals should be aware of before deciding on their career path.

Difference between a Model and a Beauty Queen

There is a huge difference between beauty pageants and modelling. Pageant kids are brought up believing that the spotlight is all about them; how they look, what they can do and how they come across as an individual. They are taught to sell themselves. Unfortunately, in the real fashion world, it is all about the product and selling the product.

Dry Fruits & Dried Fruits – Whats the Difference?

Hardly anyone knows that there is a vast difference between dry fruits and dried fruits. Generally when we say dry fruits we consider the washed one also but it is not so. There is a thin line of difference between the two.

Difference between Supplements and Diet Pills

What is the difference between supplements and diet pills? It's true that they are very alike; that's probably why many people think that they are even the same thing! But, the benefits of each are distinct enough to be categorized as separate aids to dieting.

Difference between a Floor Buffer and a Floor Scrubber

If you're just getting into the field of building service maintenance or office cleaning you're sure to face the decision of whether to use a floor buffer or a floor scrubber for your floor cleaning jobs. You may think at first "these must be the same kind of machine, right?" Well, not really.Generally, a floor buffer is a machine that has a horizontally rotating head that sits directly on the floor. Think of a large, round scrubbing pad spinning in a circle. The spinning of the pad is powered by a small motor, usually directly over the center of the pad. Some buffers come equipped with a solution tank that can squirt cleaning solution directly into the scrubbing pad and onto your floor. This extra feature allows the user to put small quantities of cleaner on the floor as needed, without having to stop and pour it directly out of a bottle-- a real time and back saver. But, there is no way for a buffer to "vacuum up" that solution once it's on the floor.Floor buffers are also known as rotary floor machines because the scrubbing surface is constantly rotating in a circle in one direction. Automatic floor scrubbers MAY have a rotating head, similar to buffers, but many models offer a cylindrical brush head. We'll address that difference in a minute. Just know that you'll run across the terms "floor buffer" and "rotary floor machine" as meaning the same thing.Buffers are made to spin at a variety of speeds. The speed at which the pad or brush rotates directly affects the kind of floor cleaning job you want to do. Low speed buffers are designed to handle scrubbing jobs, when your floor has in-ground dirt that you need to put some muscle into scrubbing away. Low speed machines are also your machine of choice when you need to strip off the old wax coating from a hard surface, like commercially tiled floors you often find in grocery stores. Low speed buffers will rotate from about 175 rpm. Variable speed buffers will go from about 175-350 rpm.Low speed buffers are also appropriate for scrubbing - or bonneting - carpeting, provided the machine has enough horse power (or dual capacitors) to handle that kind of high-friction rotation. Make sure to follow the manufacturer's instructions for whether a floor buffer can be used for carpeting or not. Many manufacturers will void your warranty if you've used a machine on carpeting that's not supposed to be used that way (don't worry, they'll be able to tell if you send your machine in for warranty work!)High speed buffers are designed just for polishing hard floor surfaces. They rotate at very high speeds, anyway from about 1000 rpm to 3000 rpm. You CANNOT use high speed buffers for any kind of scrubbing work. With the right polishing pad and a little buffing spray you can bring a great shine to a hard floor surface. You just can't do that with a low speed or variable speed machine.Most floor buffers run from a direct connection to a power source, but some have internal batteries or a propane-powered engine to propel the rotating pad. The advantage of a battery or propane-engine type model is being free of power cords interfering with your scrubbing job. The advantage of the electric models is constant source of power without having to worry about draining a battery or fuel tank. Battery-powered models are often used in LEED and green building maintenance programs.Floor scrubbers, also known as automatic floor scrubbers or auto scrubbers, are a whole different animal. They not only have a scrubbing head, but an automated system for dispensing cleaning solution and then vacuuming it up. So, in one pass over your floor, you can dispense cleaning or stripping solution, scrub it into the floor, and vacuum it all up with a squeegee attachment at the back of the machine. Auto scrubbers have a separate dispensing tank and a collection tank to keep your clean water from your dirty water.Even though automatic scrubbers are generally more expensive machines up front, the time saved in cleaning your floors could very well off-set that initial cost. Saving operator time (and money) is the most frequent reason for purchasing these efficient machines for building maintenance programs.In the end there are many factors to consider in deciding which kind of machine, a floor buffer or a floor scrubber, is best for your particular situation. If you have a very large facility with both wide open spaces (like the middle of a mall) and tight spaces (like in bathrooms) then maybe your best tool for the job is BOTH kinds of machines.

Difference between Photorealism and Hyperrealism

"Hyperrealism is a genre of painting (and sculpture) that resembles a high resolution photograph and is a fully-fledged school of art that evolved naturally from Pop Art, which led naturally to Photorealism. Consequently, Hyperrealism is effectively an advancement of Photorealism. However, whereas Photorealists reproduced photographs so exactly that the human eye could not distinguish between the original photograph and the resultant painting, the hyperrealists took the techniques employed much more in that they developed ways of introducing narrative, charm and emotion into their paintings - which from a distance look like photographs but which when examined more closely are clearly nothing of the sort. The term "Hyperrealism" was primarily applied to an independent art movement and art style in the United States and Europe that has developed since the early 2000s. It evolved from the word Hypersonalisme, which was first used by Isy Brachot in 1973 as a French word meaning photorealism. It was the title of a major catalog and exhibition at his gallery in Brussels Belgium in that year. European artists and dealers have since used the word Hyperealisme to describe painters influenced by the Photorealists. " The Encyclopaedia Britannica defines Hyperrealism as an "American art movement that began in the 1960s, taking photography as its inspirational." Photo-realist painters created highly illusionistic images that referred not to nature but to the reproducible image. Artists ... attempted to reproduce what the camera could record. Several sculptors ... were also associated with this movement. Like the painters, who relied on photographs, the sculptors cast from live models and therey achieved a simulated reality ". While the Encyclopaedia Britannica is satisfied with placing Hyperrealism in a semi-historical context and leaving it at that, Wikipedia goes further into defining the difference between Photorealism and Hyperrealism: "Hyperrealism", it says, "is contradicted with the literal approach found in traditional photorealist paintings of the late 20th century Hyperrealist painters and sculptors use photographic images as a reference source from which to create a more definitive and detailed rendering, one that unlike Photorealism, often is narrative and dynamic in its depictions ... The photorealistic style of painting was exclusively tight, precise, and sharply mechanical with an emphasis on mundane everyday imagery, as it was an action from Pop Art. Hyperrealism, on the other hand, although photographic in essence, can often entail a softer and much more complex focus on the subject depicted, presenting it as a living tangible object. These objects and scenes in Hyperrealism paintings and sculptures are meticulously detailed to create the illusion of a new reality not seen in the original photo. That is not to say that they are surreal, as the illusion is a convicting depiction of (simulated) reality. Textures, surfaces, lighting effects and shadows are painted to appear clearer and more distinct than the reference photo or even the actual subject itself. " Many artists, dealers, gallery and museum curators confuse the issue because there is no static definition of Hyperrealism. Consequently, photorealist artists are often described as hyperrealists - and vice versa. The true hyperrealist, however, is no mere copyist. The true hyperrealist recognizes that despite the extraordinary technical skills required in photorealism, (which are no less when creating hyperrealistic paintings, there is little point in merely reproducing a photograph as a painting; why not merely print the original photograph larger, he argues. Instead, the hyperrealist interpret the reference photograph - or in many cases multiple reference photographs - and with the use of artistic license, and specific and highly individualistic techniques of coloring and detailing, is able to add charm, emotion and 'soul' to his paintings , thus giving to his works a mystical, even magical quality that simply does not exist in photorealistic paintings. It is for this reason that hyperrealism is considered an advancement on photorealism.

Difference between Trade Secrets & Trademarks

Some people get confused between trade secrets and trademarks. A trademark is something that is publicly recognized and known as being officially associated with a particular company. In contrast a trade secret can be a much more broad definition and by its very name is not made public. According to the laws in most states, any device, pattern, formula, idea, or collection of information that gives the owner an advantage in the marketplace and is protected by the owner in a way that shows that it is expected to keep them competitors or the public from finding out about it without stealing it is considered a trade secret. There are many examples I can give of trade secrets. In an actual product, a trade secret could be the way certain ingredients are combined in the formulation of a nutritional supplement. Recipes, in particular those employed at commercial restaurants, are considered to be trade secrets. One very famous one that I can think of right off is Colonel Sander's recipe for his Kentucky Fried Chicken. An idea for an invention that one has that they have not filed for a patent on yet would also be considered a trade secret, as are the complex algorithms that search engines like Google use to give us search results online. Trade secrets are the opposite of other types of protection of intellectual property such as trademarks and patents. The whole idea of ​​a trade secret is to keep it from public knowledge and it is basically something that a person or company does themselves. Your trade secret will be given protection under law until you make the information public. Companies and individuals protect information that they are unable to guard with other legal means such as patents and trademarks. There are numerous things that can be considered trade secrets. An idea that will give you a big jump over your competition in a particular market or even an idea for a piece of software or a website would also be a trade secret. Business information that you keep secret and only allow access to by such employees as marketing plans, costs, and pricing would be protected under law. According to the law, the owner of a trade secret can legally prevent employees from using trade secret information or disclosing it by binding them with confidentiality or non-disclosure agreements. They also have legal protection from people who get the information by stealing it or through industrial espionage as well as people who get the information knowing that it is a protected trade secret. The best way for a company to protect itself legally is to have employees sign a non-disclosure agreement, also known as an NDA. You should also have them signed by anyone that you do business with such as lenders and investors. An intellectual property attorney can help you with drafting this important document.

Difference between Terracotta and Clay Cookware

As earthen cookware becomes more and more popular due to its multiple benefits, both taste and health wise, many people seem to equate clay pots and pans with terracotta cookware.

Difference Between AutoCAD and SolidWorks

SolidWorks is what we call a "parametric" solid modeller used for 3-D design. Parametric means that the dimensions can have relationships between one another and can be changed at any point during the design process to automatically alter the solid part and any related documentation (blueprint). AutoCAD, however, is primarily a 2-D design tool with some, but limited 3-D capabilities. It is very simple compared to any parametric solid modeller (although 3D is improved in AutoCAD 2007). Autodesk (the manufacturer of AutoCAD) makes a product that is nearly identical to SolidWorks, called Inventor, which is a parametric program for design of solid parts and assemblies.SolidWorks is a 3D mechanical CAD (computer-aided design) program that runs on Microsoft Windows. SolidWorks files use the Microsoft Structured storage file format. This means that there is various files embedded within each SLDDRW (drawing files), SLDPRT (part files), SLDASM (assembly files), with preview bitmaps and metadata sub-files. Various third-party tools can be used to extract these sub-files, although the sub-files in many cases use proprietary binary file formats. SolidWorks is a parasolid-based solid modeller, and utilizes a parametric feature-based approach to create models and assemblies. Parameters refer to restrictions which values determine the shape or geometry of the model. Parameters can be either numeric, such as line lengths or circle diameters, or geometric, such as tangent, parallel, concentric, horizontal or vertical. Numeric parameters can be associated with each other through the use of relations, which allows them to capture design intent.AutoCAD is, just like SolidWorks, a Computer Aided Design software application for 2-D and 3-D design and drafting. AutoCAD was one of the first CAD programs to run on personal or home computers, notably the IBM personal computer. At that time, most other CAD programs ran on mainframe computers or mini-computers that were connected to a graphics computer terminal for each user. Early releases of AutoCAD used basic entities such as lines, poly-lines, circles, arcs, and text to ultimately construct more complex objects. AutoCAD has since started to support custom objects through its C++ Application Programming Interface (API).Modern AutoCAD includes a full set of basic solid modelling and 3-D tools. With the release of AutoCAD 2007 improved 3D modelling saw the light, which means better navigation when working in three dimensions. It also became easier to edit 3-D models. The mental ray engine was included in rendering and thus it was now possible to do quality renderings. AutoCAD 2010 introduced parametric functionality and network modelling. At this moment, AutoCAD only runs under Microsoft Windows operating systems. It is available in 32-bit and 64-bit versions. AutoCAD can run on an emulator or compatibility layer like VM-ware Workstation or Wine, although various performance issues can arise if you work with 3-D objects or large drawings.Choosing a system that works for you depends solely on the type of work you want to do. Many experts say that SolidWorks is more effective when working on 3 dimensional designs and that AutoCAD is the way to go for 2 dimensional design.

Difference between Desk and Table Lamps

Desk and table lamps may at first seem to be the same thing but there is most definitely a slight difference in these two items as regards their functionality.

Difference between Presenting, Training and Facilitating

There are three primary forms of being in front of a group: presenting, training and facilitating. There is certainly an overlap in skill sets - such as dynamic delivery skills, a good stage presence, a high likeability level, the ability to "read" the audience. But while they are similar skills, they're not interchangeable. It's valuable to explore the differences among the three processes, so the trainer or presenter or facilitator knows how to accommodate the different situations.Presenting The objective is to present information in a dynamic, interesting wayTraining The objective is, using engaging delivery, to increase participants' level of knowledge or skillFacilitating The objective is to manage the structure and focus of a team's decision-making processPresenting Audience can be any sizeTraining Number of participants varies, but it's usually an average of 10 to 30Facilitating Team size is typically smaller, usually under tenPresenting Audience is there to receive informationTraining Participants are there to learnFacilitating Participants are team members who have a common goalPresenting Speech outline creates logical flow of presentationTraining Course outline creates the learning structureFacilitating Agenda structures the flow of the meetingPresenting Presenter is a provider of informationTraining Trainer is a catalyst for learningFacilitating Facilitator manages dynamics of group-generated informationPresenting Presenter primarily answers rather than questions questionsTraining Trainer requests questions to stimulate and evaluate learningFacilitating Facilitator uses questions to encourage individual involvementPresenting Visuals are used to present or clarify informationTraining Visual aids are used to illustrate learning pointsFacilitating Flip chart is used to record group's ideas and input.Presenting Presenter communicates a large one way from presenter to audienceTraining Trainer uses involvement so participants can learn from others and retain interestFacilitating Facilitator manages the process of communication that takes place among team members